1-2kg food grade bag-given powder filling machine
Bag Width:150mm- 280mm
Bag Length: 150mm-320mm
Power: 220VAC 20 Amps
Air: 7.0 CFM@80 PSI
The process starts with up to 300 empty pouches
being placed into the adjustable cartridge. Bags
can be loaded while the machine is in operation
Multiple bag detection switches are used at various points in the cycle to ensure correct bag placement and full bag opening.
Should a reject bag be detected it is ejected from the machine and the process continues. Rejected bags can be inspected by the
operator and re-used if good.
Pouches are individually removed from the cartridge with a unique combination of vacuum and pneumatic actuators. They are
rotated to the fill area and opened.
doubling as a timing bucket. product enters the transition chute while the bag is being opened below. Upon pouch detection the
chute enters the bag and opens its gate. Product is dispensed immediately, without spillage and protecting the seal from
contamination. Difficult product that easily bridges is dispensed into the pouch directly from the filler, through the "open-gate''
During filling, pouches are held in place with our “posi-hold” gripper system. This allows for heavy weights and shock loads
without disturbing bag Position
Digitally controlled ribbed or flat constant heat seal bars give a integral attractive seal. Pouches are sealed ''in place" eliminating wrinkles, folded corners and non aligned seals
System controls are fully solid state. utilizing a commercial Programmable Logic Controller [PLC] and pneumatics. Indicator
lights signal all cycle processes for easy monitoring.
Machine details pictures: